Skip to main content

Tag: Mechanics in Albuquerque

3 Unique Foreign Vehicle Engine Repair Problems

Written by bherreraRGA on . Posted in Auto Repair and Maintenance Services. No Comments on 3 Unique Foreign Vehicle Engine Repair Problems

Foreign vehicles have gained in popularity for their innovative designs, cutting-edge technology, and superior performance. European luxury cars, Japanese sports vehicles, and Korean compact cars all come with an allure and thrill to driving them.

However, like any mechanical system, foreign vehicle engines are not immune to needing repairs. Foreign automobiles experience unique problems that may not be as common in domestic engines. Some of the most likely problems include:

  • Direct injection carbon buildup
  • Variable valve timing system issues
  • High-pressure fuel pump failure

No matter which issue plagues your foreign vehicle’s engine, we can help. Give us a call to set up an appointment for diagnostic services and engine repair in Albuquerque.

A speedometer in the dash of a foreign vehicle.

1 – Direct Injection Carbon Buildup

Many foreign vehicle engines use direct injection technology. It’s favored for its ability to provide higher fuel efficiency, more power, and fewer emissions. Unfortunately, the many benefits come with a few drawbacks, including the threat of carbon buildup in the intake valves.

Detergent and other cleaning agents added to fuel don’t clean the port and valve in foreign vehicles as well as they perform in domestic model engines. Once your foreign auto’s engine hits between 30,000 and 60,000 miles on the odometer, you may start to experience the tell-tale signs of direct injection carbon buildup.

Some of the warnings include:

  • Cold stalling
  • Engine misfires
  • Loss of power at higher speeds
  • Rough idling
  • Poor acceleration
  • Reduced fuel efficiency

If you start to notice any of these things happening with your foreign model vehicle, visit a trusted mechanic who specializes in foreign engine repair in Albuquerque.

A mechanic examines the solenoid component in a foreign vehicle.

2 – Variable Valve Timing System Issues

Some foreign engines incorporate complex variable valve timing systems (VVT) that adjust valve timing for optimal performance. Foreign vehicle owners are blissfully unaware of this feature – until something goes wrong with it, that is.

What causes the VVT system to go wonky in a foreign engine?

  • Age. The older your engine gets, the more likely the VVT system will fail. Normal wear and tear lead to decreased performance over time.
  • Engine sludge or debris. One of the most common reasons VVT systems fail is due to the buildup of debris or sludge in the engine. Over time, oils and other fluids accumulate, clogging your VVT system. Engine noise increases as your vehicle’s performance decreases.
  • Faulty solenoid. Solenoids control the flow of oil through the VVT system. The VVT can get stuck in one position if the solenoid malfunctions, causing engine noise and decreased performance.

Ticking and tapping sounds coming from the engine when your car is accelerating or idling are among the most common warning signs of VVT failure.

The best way to protect against VVT problems is with regular engine oil changes and inspections by a qualified mechanic skilled in foreign engine diagnostics and repair.

A mechanic holds a fuel pump for a vehicle in his hands.

3 – High-Pressure Fuel Pump Failure

While not technically an engine issue, high-pressure fuel pump (HPFP) failure can cause your engine to misfire, perform poorly, or refuse to start. HPFP systems are common in many foreign vehicles because normal low-pressure fuel pumps lack adequate pressure to pump fuel efficiently in some models.

HPFPs allow more fuel to flow to the engine, providing superior performance.

Among the things that can go wrong with a high-pressure fuel pump include:

  • Contamination in the low-pressure system
  • External mechanical damage
  • Fuel leaks
  • Internal mechanical damage to the drive, roller tappet, or pump
  • Poor lubrication

If you notice your engine behaving erratically, a lack of power in the upper-speed range, and stalling, it’s time to call a trusted mechanic who specializes in foreign engine repair in Albuquerque. It’s in your best interest to get the problem diagnosed quickly before it damages your engine, leading to more costly repairs.

How to Spot Common Engine Problems

Written by bherreraRGA on . Posted in Auto Repair and Maintenance Services, Oil Change Albuquerque. No Comments on How to Spot Common Engine Problems

Your vehicle may send you subtle signs that it needs engine repair in Albuquerque. Weird sounds, rough idling, and overheating are all warnings your engine needs a little TLC from your trusted mechanic.

Ignore these cries for help, and you might find yourself on the business end of some expensive engine repairs. Worse yet, you might end up stranded along the side of a busy highway, waiting for a tow truck to rescue you.

Before you need engine repair in Albuquerque, learn how to recognize the signs and symptoms of 5 of the most common engine problems.

1 – Engine Misfire

Engine misfires happen when one or more cylinders fail to ignite the air-fuel mixture properly. There are several reasons why engine misfiring happens.

  • Air-fuel mixture issues. Air-fuel mixtures must be at the correct ratio for efficient combustion. Too much air reduces the amount of fuel your engine receives, causing it to malfunction. Conversely, if your engine receives too much fuel and not enough air, it can idle roughly. Air-fuel mixture issues are often caused by a faulty mass airflow (MAF) sensor, oxygen sensor, or a problem with the fuel injection system.
  • Engine mechanical problems. Some mechanical issues such worn-out piston rings, damaged valves, and blown head gaskets, disrupt the combustion process. Timing chain or belt issues can affect the synchronization of engine components.
  • Fuel system problems. Poorly functioning fuel systems cause engine misfires. Clogged or dirty fuel injectors, malfunctioning fuel pumps, faulty fuel pressure regulators, and restricted air filters can interfere with the fuel system.  

It’s easy to identify engine misfire issues in your vehicle. Some of the warning signs include:

  • Frequent jerking during acceleration.
  • Increased fuel consumption.
  • Loss of power.
  • Rough idling.
A woman stands facing her car with the hood up as smoke billows from underneath the hood because she needs engine repairs in Albuquerque.

2 – Overheating

Overheating happens when the engine temperature rises beyond safe operating limits. Living in the extreme summer temperatures in New Mexico can stress any engine occasionally. However, repeated overheating is almost always a sign of serious engine damage that requires engine repair in Albuquerque.

Most modern vehicles have a sensor that alerts you to an overheating engine. Even before the warning light comes on, your engine sends other signals that it’s having trouble regulating its internal temperature, including:

  • Coolant leaks
  • Engine stalling
  • Unpleasant odors

Learning to identify the symptoms of overheating can save you on expensive engine repairs later. Some of the signals your vehicle might send include:

  • A rising temperature gauge. One of the most obvious signs of an overheating engine is a temperature gauge that regularly hovers above the normal range.
  • Excessive fan noise. When your engine overheats, a cooling fan kicks on. The fan runs more frequently and at a higher setting when overheating becomes a recurrent issue. The fan may sound louder than usual when this happens.
  • Loss of engine power. Your engine can stall and completely shut down to protect itself from further damage. If you notice a lack of responsiveness when you try to accelerate, it may be time for an engine checkup.
  • Steam or smoke under the hood. Like a rising temperature gauge, steam, or smoke from under the hood is an obvious sign of engine trouble. A burnt or sweet smell may accompany the steam or smoke, which is from coolant overheating inside the radiator.
A man checks his engine oil in his car to determine if he has a leak that requires engine repairs in Albuquerque.

3 – Oil Leaks

Think of oil as a bodyguard for your vehicle’s engine. It forms a protective barrier between the piston rings and cylinder walls to maintain proper compression and prevent gases from leaking out. Additionally, the additives in oil provide a protective coating on metal surfaces, preventing corrosion and rust formation.

If your engine begins leaking oil, it can affect its performance and longevity. Oil leaks are usually easy to spot if you know the signs.

  • Oil puddles and stains. One of the most obvious signs of an oil leak is finding puddles or stains under your vehicle. It may be a small leak, so it can be easy to miss until a few drops pile up.
  • Burning oil smell. When oil leaks while your engine is running, you may notice a burning oil smell inside or outside your vehicle. Burning oil is a fire hazard, so if you suspect an oil leak, get it checked out right away.
  • Low oil levels. Regularly checking your oil is a good idea regardless of whether you drive a newer or older vehicle. If you notice your oil is low, it can signal a leak.
  • Blue smoke from the exhaust. When your exhaust regularly emits bluish-gray smoke from the exhaust pipe while the engine is running, it’s a sign that oil is entering the combustion chamber. When this happens, it’ll burn right along with the fuel.

Shops that specialize in engine repair in Albuquerque can run diagnostic tests to determine the source of the leak.

4 – Malfunctioning Fuel System

When your vehicle’s fuel system malfunctions, it affects engine performance. You may have difficulty starting your vehicle. Engine hesitation, reduced power, and rough idling are other warning signs your fuel system isn’t operating as intended.

Your trusted mechanic uses a variety of diagnostic techniques to determine if a faulty fuel system is to blame. They can scan for codes from your onboard computer system, check fuel pressure, examine fuel injectors for clogs or leaks, and inspect the fuel pump.

A low fuel light comes on in a vehicle dash which shows the fuel guage at nearly empty.

5 – Ignition System Problems

Ignition system problems prevent your engine from properly combusting the air-fuel mixture it needs to run smoothly. Some of the symptoms this is happening include:

  • Decreased fuel efficiency
  • Difficulty starting
  • Engine misfires
  • Poor acceleration
  • Rough idling

If you suspect an ignition system issue, your mechanic uses several techniques to confirm your suspicions. They may scan your computer system for diagnostic codes, inspect spark plugs and wires, examine ignition coils, and test the ignition control module.

How to find engine repair in Albuquerque

When you need engine repair in Albuquerque, don’t trust just anyone. Rio Grande Automotive is committed to finding your engine issues and resolving them quickly. You can trust us with your engine maintenance and repair service needs.

Give us a call or stop by our shop on Griegos Road NW to schedule an engine check-up or repair service.

Big Guide on Radiator Repair and Maintenance

Written by bherreraRGA on . Posted in Radiator Repair Albuquerque. No Comments on Big Guide on Radiator Repair and Maintenance

Radiator repair and maintenance is an important part of keeping your vehicle running smoothly in Albuquerque. Unfortunately, some owners overlook this critical component, leading to severe damage and costly repairs.

A radiator’s main job is to keep your engine cool. With average summertime temps hovering in the low- to mid-90s in Albuquerque, your radiator can work overtime in the heat. Make sure it receives the attention it deserves to keep your automobile in peak operating condition.

In this big guide on radiator repair and maintenance, we provide a comprehensive guide on how to prevent problems and extend the longevity of your vehicle by taking proper care of its radiator. In this blog you’ll discover:

  • What is a radiator?
  • What are the signs of a faulty radiator?
  • What is the importance of radiator maintenance?
  • What are some common radiator problems?
  • How do you repair your radiator?
  • Can you upgrade your radiator to improve performance?

What is a radiator?

A radiator is an essential component of a vehicle’s cooling system. Without it, your automobile’s engine would overheat and stop running.

Radiators typically are made of thin, metal fins and tubes designed to dissipate heat from the engine coolant that passes through it. Most vehicle manufacturers position the radiator behind the grille at the front of your vehicle so it can receive adequate airflow when the vehicle is moving.

How radiators work

Hot coolant flows through the radiator, transfers its heat to the fins and tubes, and then releases it into the air passing through. This heat exchange process regulates the temperature of the engine and prevents it from overheating.

A woman calls for help on her cell phone while stranded along the side of the road with a steaming radiator. Radiator repair in Albuquerque is necessary if your radiator starts spitting steam. It means it can't cool the engine properly.
Steam coming from your radiator is never a good sign.

What are the signs of a faulty radiator?

Some people miss the signs of a faulty radiator because they’re sometimes difficult to spot right away. Tell-tale signals your radiator is overworked and in need of attention by an automotive technician specializing in radiator repair in Albuquerque include:

  • Discolored coolant. Over time, the coolant in your vehicle becomes dirty and discolored. If it’s rusty or has debris floating in it, that’s a sign the radiator has corroded and requires immediate attention.
  • Leaking coolant. A leak in the radiator or one of its hoses can cause coolant to leak out and reduce the radiator’s effectiveness in cooling the engine. If you see puddles of greenish fluid pooling under your car or truck, you’ll want to have a radiator repair technician diagnose it immediately.
  • Overheating engine. One of the most obvious signs of a failing radiator is an overheating engine. If your vehicle’s warning systems alert you to an engine that’s running hot, it’s probably due to a lack of coolant in the engine.
  • Steam from the engine. If you notice steam or smoke coming from under your hood, it could be signaling a coolant leak.
  • Unusual noises. Faulty radiators can hiss or make whistling sounds when air or steam become trapped in the system.

If you notice any of these signs, take your vehicle to a radiator repair shop in Albuquerque for further inspection and repair.

How to diagnose a faulty radiator

When you take your vehicle to an automotive technician specializing in radiator repair in Albuquerque, they follow specific steps to diagnose the problem.

  • Check coolant levels in the radiator and overflow tank to detect any leaks.
  • Check for blockages in the fins or tubes.
  • Inspect the radiator cap to ensure it’s maintaining the correct pressure in the cooling system.
  • Test the thermostat to ensure it’s functioning properly to prevent coolant from flowing too fast or slow.
  • Use a pressure tester to check for leaks and other problems.

Radiator repair shops have special tools that can quickly diagnose and repair a faulty radiator so you can prevent the kind of damage that leads to costly repairs.

A person wearing a white glove pours fresh radiator fluid into a vehicle's radiator as part of a fill and flush service. Replacing radiator fluid per the manufacturer's recommended maintenance schedule prevents costly radiator repairs in Albuquerque.

What is the importance of radiator maintenance?

You wouldn’t go months without changing your engine oil (at least we hope you wouldn’t). Radiator maintenance is just as crucial for keeping your vehicle running smoothly and extending its life.

Some of the reasons why you must have a radiator repair shop inspect your radiator regularly include:

  • Extends the life of the radiator. Regular maintenance extends the life of your radiator by preventing corrosion, leaks, and other issues that require costly repairs or replacement.
  • Improves fuel efficiency. When your engine fails to run at the proper temperature, you may find your fuel efficiency suffering. Overheating makes your engine work harder, which means it needs more gasoline.
  • Prevents overheating. The main purpose of the radiator is to prevent your engine from overheating. When you fail to flush and replace your radiator fluid according to the manufacturer’s recommendations, you risk it failing to work, causing expensive damage to the engine.

Following the manufacturer’s recommended maintenance schedule keeps your radiator in good working order and your vehicle at peak performance.

What are some common radiator problems?

Some radiator problems are more common than others. The issues you can encounter depend on several factors, including how much care you take to follow the manufacturer’s recommended maintenance schedule for your make and model.

If you’re going to encounter issues, here are some of the most likely scenarios.

  • Clogs in the radiator prevent the coolant from flowing through the system correctly. Debris, dirt, and rust buildup all contribute to radiator clogs.
  • Corrosion is often caused by degraded or old radiator coolant or explosion to harsh conditions. Over time, it causes leaks, clogs, and other problems.
  • Fan malfunctions prevent the radiator from pulling air through to regulate the temperature of the coolant.
  • Leaks in the clamps, hoses, and connections are the most common radiator problem.
  • Radiator cap issues can cause the coolant to evaporate, making it difficult to maintain the correct pressure in the cooling system.
  • Thermostat failure leads to coolant flowing too fast or slow, which can cause your engine to overheat.

If you experience any of these common radiator problems, take your vehicle to a trusted radiator repair shop for diagnosis and repair.

A radiator repair technician in Albuquerque welds a leak in an old radiator.
Most radiator repairs require the knowledge and skill of a radiator repair technician.

How do you repair your radiator?

How you repair your radiator depends on the type of problem you’re having. You can resolve some issues yourself – or apply a temporary fix until you can get it into a repair shop.

One of the simplest radiator maintenance jobs involves a radiator flush. You drain the old coolant from the radiator and replace it with fresh coolant. Most vehicle owners can do this themselves with basic knowledge and tools. However, if you’re not comfortable trying it, it’s best to leave it to the professionals.

If you discover a leak in your radiator, you can probably slow or stop it completely with a radiator sealant or epoxy. Complicated leaks require the expertise of a radiator repair technician, so make sure you follow up with one to make sure the leak is repaired.

When to seek professional help

Seeking professional help with radiator repairs is required under certain circumstances. For instance, if your radiator fan is malfunctioning, that’s a job best suited to an automotive technician specializing in radiator repair in Albuquerque.

Severely corroded or damaged radiators need replacing. This is a complex repair most vehicle owners have neither the knowledge nor the tools to perform themselves. Radiator replacement is a complicated procedure best left to professionals.

A brand new radiator sits next to a vehicle that's waiting to receive it.
Upgrading your radiator can improve vehicle performance in some instances.

Can you upgrade your radiator to improve performance?

Upgrading your vehicle’s radiator can improve performance under certain conditions. Some of the ways that upgrading your radiator can enhance your vehicle’s functioning include:

  • Better heat dissipation. Upgraded radiators may have better designs or materials compared with your original model. Better heat dissipation improves performance by reducing the risk of heat-related issues.
  • Higher durability. Newer radiators may consist of stronger materials or contain reinforced components that allow them to withstand harsh conditions or heavy usage.
  • Improved airflow. Some upgraded radiators may have better designs that allow for more improved airflow. Your engine can run at peak performance when it runs at its ideal temperature.
  • Increased cooling capacity. A larger or more efficient radiator provides better cooling capacity, which prevents overheating and improves your vehicle’s gas mileage.

Never try to upgrade your radiator yourself. It’s important you make sure the new radiator is compatible with the make and model of your domestic or foreign vehicle. Also, if you have a manufacturer’s or extended warranty on your vehicle, performing the work yourself might void it.

Radiator repair in Albuquerque

Need radiator repair in Albuquerque? You can trust Rio Grande Automotive to diagnose and repair radiators for domestic and foreign vehicles.

Our team has the expertise to spot issues before they cause expensive or irreversible damage. Give us a call today to schedule an appointment for diagnosis or repair.

Albuquerque Oil Changes

Your Superior Guide to Albuquerque Oil Changes

Written by bherreraRGA on . Posted in Auto Repair and Maintenance Services, Oil Change Albuquerque. No Comments on Your Superior Guide to Albuquerque Oil Changes

Oil changes are a fact of life when you own a vehicle in Albuquerque. Our sweltering summertime temperatures can thin out motor oil, especially if you’re driving for long distances.

Knowing when to check – and change – your oil is an important part of owning a vehicle. Regular oil changes extend the life of your engine and keep it running smoothly.

However, many people have questions about oil changes, including what type of oil to use and how often to change it. In this blog, we’ll answer some of the most common questions about oil changes, including:

How often should you change your oil?

Albuquerque oil changes are a necessary part of maintaining the health of your vehicle. Whether you drive it occasionally or for long distances daily, changing your oil regularly extends the life of your vehicle and prevents issues that lead to roadside breakdowns.

One of the questions most vehicle owners have is how often to change their oil. The frequency of oil changes for your automobile depends on the make and model, as well as your driving habits and environmental factors like climate.

As a rule, most vehicles need an oil change every 5,000 to 7,500 miles. However, some newer vehicles can go longer between oil changes.

If you rarely drive your vehicle, replace the mileage guideline with a timeframe of 6 months instead. Oil only lasts for a certain period before it starts to break down. It can go bad sitting in an idle engine.

It’s always a good rule of thumb to consult your owner’s manual for specific guidelines on what’s best for your make and model. When in doubt, you can ask a mechanic in Albuquerque what they recommend.

A person in a lab holds a beaker full of synthetic motor oil used during Albuquerque oil changes instead of conventional oil.
Synthetic oil is manmade and extends the life of your engine better than conventional motor oil.

What type of oil should you use?

One of the biggest debates today is over which type of motor oil to use. The synthetic versus conventional oil argument happens a lot with Albuquerque oil changes because of our climate. Let’s review your options so you can make the best decision for the life of your vehicle’s engine.

  • Conventional motor oil is a petroleum-based lubricant used in engines for decades. It’s made from crude oil and refined to remove impurities before blending it with additives to improve performance. Conventional motor oil has limitations. Its performance in extreme climates is inconsistent. It also has a shorter lifespan than synthetic oil. The only benefit is it’s less expensive than synthetic oils.
  • Synthetic motor oil is a manmade lubricant designed to improve your automobile’s performance while providing superior protection to your engine. It has a longer lifespan than conventional oil and performs better in extreme temperatures. Synthetic oil resists breakdown and chemical reactions and improves fuel efficiency. The only downside is it’s more expensive than conventional oil.

Your owner’s manual makes recommendations on what kind of motor oil works best for your vehicle. Consulting a mechanic in Albuquerque that offers oil changes to customers is another way to determine whether you should use conventional or synthetic oil.

A man pours fresh motor oil into his engine after changing the oil himself.
You can change your oil yourself if you have the know-how and tools needed. Always dispose of your used oil properly.

Can you change your oil yourself?

Can you change your oil yourself? Yes. Should you? Maybe not. Here’s why.

Changing your oil requires more than the desire to save some money by doing it yourself instead of paying a mechanic that specializes in Albuquerque oil changes to do it for you.

You need the right tools and knowledge to change your oil. If you’ve never tried it before, you risk making a mistake – like draining your transmission fluid instead of your motor oil.

Or you may fail to change the filter with the oil, which can eventually damage your engine. These kinds of mistakes are costlier than paying a mechanic to change your oil.

Proper disposal methods for used motor oil

If you decide to change your oil, it’s important to familiarize yourself with proper disposal methods for used motor oil and filters. Used motor oil isn’t classified as hazardous waste in Albuquerque. However, it’s banned from landfills and other solid waste disposal systems.

Dumping it can pollute the water supply. Instead, use a special container for collecting the used motor oil and recycle it at one of the automotive fluid recycling program collection sites across Albuquerque.

An engine oil sensor on a vehicle's dash advises the driver it's time for an Albuquerque oil change.
Most newer vehicles have engine oil sensors that alert you when it’s time to visit your mechanic in Albuquerque.

What are the signs you need an oil change?

Some vehicle owners strictly follow protocol for changing their oil. They visit their mechanic in Albuquerque every 5,000 to 7,000 miles (or 6 months) like clockwork to get fresh oil and a new filter.

Most newer vehicles include oil life indicators that signal when it’s time to change the oil, so you don’t have to track your miles between changes.

Even if your automobile has a fancy oil change tracking system, sensors can fail. It’s important to check your oil regularly for signs it’s breaking down.

Some of the most common warning signs include:

  • The oil is dark and dirty on the dipstick when you check it.
  • The engine sounds louder than usual.
  • The oil warning light comes on.
  • The engine overheats.

If you experience any of these issues, it’s best to visit a trusted mechanic in Albuquerque who can change your oil and check your vehicle for any other damage.

The inside of an engine where the engine oil has turned to sludge because the owner failed to get Albuquerque oil changes regularly.
If you ignore oil changes long enough, the oil in your engine turns into sludge, which can ruin vital engine components and lead to costly repairs.

What happens if you don’t change your oil?

Failing to change your oil regularly can reduce the lifespan of your engine. Oil becomes dirty and loses its ability to lubricate the engine properly over time. Even synthetic oil has a shelf life.

Old oil begins to gel or solidify in the engine. If left unchanged long enough, it turns to sludge, which keeps the oil from reaching all the parts of the engine that require lubrication.

Starving the crankshafts, bearings, camshafts, and other valve train components of the lubrication they need to function properly can lead to serious damage.

Eventually, your engine can seize up. Your only choice then is to replace it or to buy another vehicle. Neither option is inexpensive. It’s best to change your oil per your owner’s manual recommendations or your mechanic in Albuquerque to avoid this costly mistake.

Oil changes in Albuquerque

Albuquerque oil changes are an important part of maintaining your vehicle. Knowing when to change your oil, what type of oil to use, and how to recognize the signs it’s time to change your oil can extend the lifespan of your engine and keep it running smoothly.

If you’re not comfortable with or knowledgeable enough to change your oil, take your vehicle to a mechanic in Albuquerque.

Albuquerque Oil Changes

Synthetic vs. Conventional Oil: The Best Option

Written by bherreraRGA on . Posted in Auto Repair and Maintenance Services, Oil Change Albuquerque. No Comments on Synthetic vs. Conventional Oil: The Best Option

Synthetic versus conventional oil is a choice most vehicle owners must make when getting their oil changed. Most mechanics in Albuquerque offer the choice but always recommend the option that works best for your model of vehicle.

While synthetic oils work in any engine – including those in classic models – it’s not recommended to switch back and forth between conventional and synthetic oil blends.

This blog explores the pros and cons of synthetic and conventional motor oils to help vehicle owners decide which is the best option. Some of the questions we answer include:

What is conventional oil?

Conventional oil is a petroleum-based lubricant used in engines for decades. It’s made from crude oil refined to remove impurities and blended with additives to improve its performance.

As a lubricant, conventional oil has some limitations. First and most important, it doesn’t offer your engine the same level of protection as synthetic oil because its performance in extreme temperatures (hot or cold) is inconsistent.

Conventional oil also has a shorter lifespan than synthetic oil, which means more frequent oil changes. It’s also more susceptible to breakdown and chemical reactions than synthetic oil, affecting how well it lubricates your engine.

One of the biggest advantages of a conventional oil is it’s less expensive. It’s also compatible with most engines and is available at most automotive retailers.

A bottle of synthetic oil is poured into an engine following an oil change in Albuquerque.
A synthetic blend of oil is added to an engine after an oil change.

What is synthetic oil?

Synthetic oil is a manmade lubricant designed to improve performance and protect your engine against damage. A variety of chemical compounds are blended together to create a uniform and consistent synthetic oil.

The biggest advantages of synthetic oil are its ability to perform in extreme temperatures and better engine protection overall than conventional oil. It also has a longer lifespan, meaning fewer oil changes each year. Other benefits include:

  • Greater resistance to breakdown and chemical reactions to preserve viscosity and lubricating properties.
  • Improved fuel efficiency by reducing engine friction.

On the flip side, synthetic oil costs more than conventional oil. Some older engines may not be compatible with synthetic oil, so you should check with your mechanic before you get an oil change in Albuquerque.

What is the difference between a synthetic blend and full synthetic oil?

Synthetic blend oil and full synthetic oil have some key differences. Both serve as a substitute for conventional oil but contain slightly different ingredients.

Synthetic blend oil is a blend of traditional mineral-based oil combined with synthetic oil. Typically, it contains around 30% synthetic oil and 70% mineral oil. It’s designed to offer some of the benefits of fully synthetic oil at a lesser price.

Compared with conventional oil, synthetic blends provide improved performance and protection, particularly in high-temperature and high-stress driving conditions. However, it has a shorter life span than full synthetic oil.

Full synthetic oil consists entirely of synthetic base oils with specially formulated additives. It’s the best of the best when compared to conventional oil and synthetic blend oil. When you choose full synthetic oil, you get:

  • Longer oil life
  • Improved fuel efficiency
  • Superior engine protection
A man lays under a car to drain the oil pan before doing an oil change with either conventional or synthetic oil.
How often you change your oil depends on how often you drive and the driving conditions.

How often should you change your oil?

When it’s time to schedule an oil change in Albuquerque, you’ll want to consider what type of oil you want the mechanic to use in your vehicle.  How often you change your oil depends on the make and model of your vehicle, your driving habits, and the type of oil you use.

Most automobile manufacturers recommend changing your oil every 5,000 to 7,500 miles or every six months (whichever comes first). You can refer to your driver’s manual or check with your Albuquerque auto mechanic if you have questions.

If you regularly drive in extreme heat or cold, or in dusty environments, you may need to get an oil change in Albuquerque more frequently. Most newer vehicles come equipped with an advanced oil life monitoring system that signals you when it’s time to change the oil.

Which type of oil is best for your vehicle?

Ultimately, the best type of oil for your vehicle depends on your driving habits, the age and condition of your engine, and your budget. New, high-performance engines thrive on synthetic oils, which provide better protection. For older engines and tight budgets, conventional oil is a better option.

No matter which type of oil you choose, regular oil changes are an important part of maintaining your vehicle. Schedule your next oil change in Albuquerque by giving us a call at 505-242-3401.

4 Ways Cutting-Edge Technology Improves Automotive Services

Written by bherreraRGA on . Posted in Auto Repair and Maintenance Services. No Comments on 4 Ways Cutting-Edge Technology Improves Automotive Services

Gone are the days when automotive repairs and maintenance required nothing more than a toolbox. Advancements in technology have given mechanics in Albuquerque cutting-edge equipment to provide top-notch automotive services.

In this blog post, we’ll learn about the types of cutting-edge technology mechanics in Albuquerque use and how it benefits customers by extending the life of your vehicle.

Auto mechanics use a car's computer system to analyze problems that need repair.
Today’s vehicles include a lot of built-in technology that requires advanced technology to diagnose and repair.

1 – Efficiency and Precision

Using cutting-edge technology, mechanics in Albuquerque can diagnose and repair issues with your commercial or passenger vehicle more efficiently and with greater precision.

They use advanced computer systems to analyze data from your vehicle’s sensors to determine what is causing a specific problem. When problems are pinpointed with laser precision, it ensures the right repairs are made with fewer mistakes and a quicker turnaround time.

One example of how mechanics use technology to diagnose and repair issues is through diagnostic scanners and code readers. These tools connect to your vehicle’s computer system and retrieve error codes indicating problems with the engine, emissions system, or transmission.  Mechanics save time and money by avoiding extensive manual troubleshooting.

2 – Improved Customer Experience

Advanced technology improves the customer experience. Mechanics in Albuquerque use digital systems to keep track of appointments, send reminders, and provide updates to their customers.

Some of the other ways auto repair shops use technology include:

  • Digital inspections. Some auto repair shops offer digital inspections using a tablet or smartphone to take photos of the vehicle’s condition and any issues that need addressing. The mechanic then sends the information to the customer via email or text message, along with an estimate for repairs. Using technology this way improves the customer experience by offering transparency and building trust between you and your mechanic.
  • Electronic payment. Many auto repair shops offer electronic payment options including paying online and using mobile apps. Providing these alternatives to traditional payment methods makes it easier and more convenient for customers to pay for services.
  • Online appointment booking. No more waiting on hold to speak with someone during business hours. Auto repair shops that use online booking systems for their customers make it easier for them to schedule appointments when it’s convenient.
  • Real-time communication. You don’t have to sit and wait for mechanics to finish your repairs with real-time communication tools at your auto mechanic’s disposal. They can send a text alert with updates on the repairs and when your vehicle is ready for pickup.
An mechanic in Albuquerque installs a backup camera in a vehicle showing the space behind a car to improve safety.
Backup cameras enhance the safety of your vehicle. Auto mechanics in Albuquerque can add them to your vehicle.

3 – Enhanced Safety Features

Another advantage of using cutting-edge technology in automotive services is the ability to enhance safety features in your vehicle. Mechanics in Albuquerque can install advanced safety features like:

  • Automatic emergency braking. Using sensors to detect when a collision is imminent, these systems automatically apply the brakes to avoid or reduce the severity of a crash.
  • Back-up cameras. Most newer vehicles come with this added safety feature. If yours doesn’t have it, your mechanic easily can add it to prevent you from backing into objects or people by showing you all angles at your vehicle’s rear. Backup cameras prevent up to 16% of all accidents and are the most beneficial to drivers over the age of 70.
  • Blind-spot monitoring. Detecting vehicles in your blind spot while driving can mean the difference between avoiding an accident and having one. Mechanics can install blind-spot monitoring systems that detect vehicles in the blind spot and alert drivers with lights or sounds.
  • Lane-departure warning. It’s easy to accidentally drift into another lane of traffic, especially if you’re distracted by something behind the wheel. Lane departure warning technology uses cameras and sensors to detect when your vehicle is drifting out of its lane. It sends a warning using lights or sounds.

4 – Increased Sustainability

Cutting-edge technology for your vehicles doesn’t have to negatively impact the environment. Mechanics in Albuquerque incorporate technology that’s environmentally friendly into their work that improves your experience as a customer.

Some of the ways they practice responsible sustainability through technology include:

  • Installing electric vehicle charging stations at their shops for customer use.
  • Recycling old parts and vehicle fluids responsibly.
  • Using eco-friendly car products if they provide complimentary vehicle washes with service.

Enjoy the advantages of technology

Using cutting-edge technology in automotive services provides numerous advantages. Increased efficiency and precision, improved customer experience, enhanced safety features, and increased sustainability are among the ways mechanics in Albuquerque use technology advancements to provide top-notch service to their customers.

If you need automotive services, consider a mechanic using these and other technologies for a superior experience.

4 Benefits of Pro Mechanics in Albuquerque

Written by bherreraRGA on . Posted in Auto Repair and Maintenance Services, Vehicle Repair Services. No Comments on 4 Benefits of Pro Mechanics in Albuquerque

When it comes to automobile maintenance and repair, finding reliable and professional mechanics in Albuquerque is a must. Not only are they responsible for fixing your vehicle’s issues, but they also maintain their critical components to help it last longer.

In this article, we’ll review the top 4 benefits of finding the right pro mechanics in Albuquerque to service your vehicle.

An auto mechnic in Albuquerque checks the air pressure of a car's tire as part of routine maintenance.
Checking your car’s tires for appropriate levels of inflation is an important part of performing regular maintenance. Improperly inflated tires cause car handling issues and can lead to abnormal wear and tear.

One – Regular Maintenance

Regular maintenance is one of the most important reasons why you need professional mechanics in Albuquerque. You can prevent major issues from happening and prolong the life of your vehicle with regular maintenance.

Professional mechanics have the expertise and experience to identify problems and address them before they turn into costly repairs. Whether you drive a domestic or foreign model, choose a mechanic familiar with your automobile to assure quality service.

Common maintenance services

Every vehicle comes with a manual that outlines a recommended maintenance schedule. You can learn when it’s best to change oil and filters, flush radiators and transmissions, and other critical care to keep your car or truck humming along.

Among the regular maintenance items for domestic and foreign vehicles:

  • Air filter replacement. Air filters prevent dirt, dust, and other debris from entering the engine. Over time, the filters become clogged and need replacing. Most automobile manufacturers recommend changing out air filters every 15,000 to 30,000 miles.
  • Battery check. Regularly checking your car’s battery can prevent unexpected breakdowns. You should have a professional mechanic check it every six months.
  • Brake inspection. Regular brake inspections identify issues early to prevent brake failure. You should have your brakes inspected every 6,000 miles.
  • Fluid level check. Brake fluid, coolant, power steering fluid, and transmission fluid help your vehicle operate as intended. Checking levels every 3,000 to 5,000 miles is recommended.
  • Oil change. Changing your engine oil removes debris and dirt that can cause engine damage over time. Depending on the make and model of your car, you’ll need an oil change every 5,000 to 7,500 miles or every 6 months, whichever comes first.
  • Spark plug replacement. Spark plugs play an important role in igniting the fuel in the engine. They should be replaced every 30,000 to 100,000 miles, depending on the type of plug and how often you drive your vehicle.
  • Tire rotation. Rotating your tires extends their lifespan by preventing uneven wear and tear. Most mechanics recommend rotating tires when you have an oil change.

Two – Emergency Repairs

Breaking down along the side is the road – especially late at night – is no fun. No matter how well you maintain your vehicle, emergencies can still happen. A professional mechanic in Albuquerque can provide emergency repairs when needed.

These experts have the right tools and knowledge to fix your automobile’s issues quickly and efficiently. They also have access to high-quality replacement parts to ensure compatibility with your car or truck.

Common types of emergency repairs

Emergency repairs may become necessary if you have an accident or other unexpected issue with your vehicle. Some of the most common types of emergency repairs include:

  • Brake failure.
  • Dead battery.
  • Engine overheating.
  • Flat tire.
  • Fuel system issues.
  • Ignition failure.
  • Transmission failure.
A mechanic in Albuquerque checks a vehicle's exhaust system for needed repairs.
Exhaust upgrades can improve your vehicle’s overall performance.

Three – Improved Performance

Professional mechanics in Albuquerque can improve your car’s performance by identifying and fixing any problems before they cause lasting damage. They can tune up your engine, replace worn-out parts, and address any other problems that may be causing your car or truck to behave abnormally.

Common techniques for improving performance

Increasing fuel efficiency and saving you money on more costly repairs in the future are just two of the benefits of regular visits to your trusted mechanic.

Some of the ways your mechanic can improve your vehicle’s performance includes:

  • Air intake and exhaust upgrades improve engine performance by allowing better airflow and boosting horsepower. Installing high-performance air filters, a cold air intake, or upgrading the exhaust system are among the ways mechanics make these improvements.
  • Brake upgrades to improve stopping power and overall safety. Installing new brake pads, calipers, and rotors is part of the process.
  • Computer tuning requires the modification of the software that controls your automobile’s engine. Making these adjustments can increase fuel efficiency, horsepower, and torque.
  • Suspension upgrades include installing new coil springs, shocks, and struts to improve handling.

Four – Warranty Protection

All new cars come with limited warranties from their manufacturers. Most cover critical components like the engine and transmission should they fail because of a manufacturing defect or other issues outside the owner’s control.

Regular maintenance and repairs must be performed by certified professionals as a condition of maintaining warranty coverage. Some of the maintenance requirements outlined in warranty agreements include:

  • Regular inspections.
  • Regular oil changes.
  • Regular tire rotations.

If you attempt to perform these tasks yourself or take your car to uncertified mechanics in Albuquerque, you risk voiding the warranty. By working with a professional mechanic in Albuquerque, you can ensure you’re meeting the terms and conditions of your warranty.

Find a mechanic in Albuquerque

Finding a professional mechanic in Albuquerque is essential for maintaining your car’s health, longevity, and performance. Regular maintenance, emergency repairs, improved performance, and warranty protection are just a few of the benefits of working with these experts.

Don’t wait until it’s too late. Give Rio Grande Automotive a call today to schedule your next routine maintenance appointment.

Skip to content